Лазерен гравир X500III

  

  • $1·          Функция “Drag-N-Play” – позволява позициониране в стартова позиция на ръка.

    $1·          Closed-loop DC сервомотори с обратна връзка с висока скорост и точност.

    $1·          Контрол на лазераният лъч позволяващ рязане на 20 mm плексиглас и 256 нива на гравиране.

    $1·          Отваряне на предните и задните капаци, позволяващо работа  с неограничени по дължина от машината материали.

    $1·          Функция SmartCENTER™ - автоматично локализиране на централната точка на обекти с всякаква форма.

    $1·          SmartACT™ увеличаващ продуктивността чрез оптимизация на движението.

    Спецификации:

    X500III

     

    Wattage

    80W

    100W

    130W

    150W

    Laser Source

    Sealed CO2 Laser

    Cooling

    Water Cooled

    Working Area

    51.1 x 36.1 in. (1300 x 916 mm)

    Max. Part Size (W x L x H)

    All doors closed

    53 x 36 x 1.9 in. (1346 x 914 x 50 mm)

    All doors open

     53 x ∞ x 1 in. (1346 x ∞ x 25 mm)

    Dimensions  (W x L x H)

    74.8 x 55.1 x 47.2 in. (1900 x 1400 x 1200 mm)

     

    Drive

    Closed-loop DC servo control

     

    Maximum Motor Speed

    40 IPS

     

    Speed Control

    Adjustable from 0~100% (Up to 16 color-linked speed settings per job)

     

    Power Control

    Adjustable from 0~100% (Up to 16 color-linked power settings per job)

     

    Engraving Capability

    256-level gray scale image processing capability

     

    Z-Axis Movement

    Manual

     

    Resolution (DPI)

    Available 125, 250, 300, 500, 600, 1000

     

    Computer Interface

    Standard printer port and USB 2.0** port

     

    Memory Buffer

    32MB standard

     

    Focus Lens

    Standard 2",Optional 3"

    Standard 3",Optional 2"

     

    Display Panel

    4-line LCD panel showing current file name, total working time, laser power, engraving speed, file(s) loaded into memory buffer, setup and diagnostic menus.

     

    Safety

    Class I Laser Product Compliant with EN60825
    Class II Laser Product Compliant with CDRH
    2006/42/EC Machinery Directive Compliance

     

    Cutting Table

    Knife-shaped cutting table with dust collecting tray

     

    Facility Requirements

       

    Operation Voltage

    200-240 Volt AC/15A

     

    Power Consumption

    1250W

    1250W

    2000W

    2000W

     

    Air Exhaust System

    External exhaust system required to connect to 8-inch opening on machine 
    (Air volume) (free flow 1400 m3/h, static pressure 2700 pa) 

     


    *Speed is not equal to throughput. See dealer or visit www.GCCworld.com for more details.
    ** File transmission at USB 2.0 Full Speed rate.

    Specifications are subject to change without prior notice.



Изпрати запитване

Име: *

Email: *

Тема: *

Запитване: